Canon EF-M 18-55mm f3.5-5.6 IS STM - Manual (Page 2)

ENG-2
❺
0812Ni © CANON INC. 2012
5. Hood (sold separately)
The EW-54 hood cuts out unwanted light and protects the front of
the lens from rain, snow, and dust.
To attach the hood, align the hood’s attachment position mark with
the red dot on the front of the lens, then turn the hood as shown
by the arrow until the lens’ red dot is aligned with the hood’s stop
position mark. (fig.❺)
The hood can be reverse-mounted on the lens for storage.
• If the hood is not attached properly, vignetting (darkening of
the perimeter of the picture) may occur.
• When attaching or detaching the hood, grasp the base of
the hood to turn it. To prevent deformation, do not grasp the
rim of the hood to turn it.
6. Filters (sold separately)
You can attach filters to the filter mounting thread on the front of
the lens.
Only one filter may be attached.
Specifications
Focal Length/Aperture 18-55mm f/3.5-5.6
Lens Construction 11 groups, 13 elements
Minimum Aperture f/22-36*
Angle of View
Diagonal: 74°20′-27°50′
Vertical: 45°30′-15°40′
Horizontal: 64°30′-23°20′
Min. Focusing Distance 0.25 m/0.82 ft.
Max. Magnification 0.25x (at 55 mm)
Field of View
Approx. 168x260-61x92 mm/
6.61x10.24-2.40x3.62 inch
(at 0.25 m/0.82 ft.)
Filter Diameter 52 mm
Max. Diameter and Length 60.9x61.0 mm/2.40x2.40 inch
Weight
Approx. 210 g/7.4 oz
Hood EW-54 (Sold Separately)
Lens Cap E-52 II
Dust Cap Lens Dust Cap EB
Case LP814 (Sold Separately)
* Applies to 1/3-stop increments. With 1/2-stop increments, it will be
f/22-38.
• Equivalent to 29-88 mm in the 35mm film format.
• The lens length is measured from the mount surface to the front end
of the lens. Add 20 mm when including the lens cap and dust cap.
• The size and weight listed are for the lens only, except as indicated.
• Extenders cannot be used with this lens.
• Aperture settings are specified on the camera. The camera
automatically compensates for variations in the aperture setting
when the camera is zoomed in or out.
• All data listed is measured according to Canon standards.
• Product specifications and appearance are subject to change
without notice.
COP
Y