Canon FAXPHONE L100 - Manual (Page 24)

24
Switch to the Sleep Mode
You can switch to and cancel the Sleep mode easily, by press [ ] (Energy Saver).
When the Processing/Data indicator is lit or blinking, the machine will not enter the
Sleep mode, because an operation is in progress or an error has occurred.
By default, the machine automatically enters the Sleep mode if you do not
perform any functions for 10 minutes. To change this setting, press [
]
(Menu)  <Timer Settings>  <Sleep Timer>, and then specify a time.
Use the Toner Saver Mode
You can set whether or not to conserve toner when copying or faxing. When using the
Toner Save mode, the output may not be clear, as subtle details, such as thin lines and light
colors may not be clearly reproduced.
1
Press [ ] (Menu).
2
Press [
▲
] or [
▼
] to highlight <Preferences>, and then press [OK].
3
Press [
▲
] or [
▼
] to highlight <Toner Saver Mode>, and then press [OK].
Preferences
Sound Volume Control
Display Settings
Toner Saver Mode
4
Press [
▲
] or [
▼
] to highlight <Copy> or <Fax>, and then press [OK].
5
Press [
▲
] or [
▼
] to highlight <On> or <Off >, and then press [OK].
6
Press [ ] (Menu) to close the screen.