Canon FAXPHONE L100 - Manual (Page 53)

53
Fa
x
When a Fax or Call Comes In
The handset continuously rings in Manual mode. Pick up the handset or the receiver of the
external telephone to answer the call. If the call is a fax, you will hear a beep. See “Receiving
Faxes in Manual Mode,” to manually switch to receive mode.
Receiving Faxes in Manual Mode
If you hear a beep when you answer a call in manual mode, the call is a fax. Follow the
procedure below to manually switch to receive mode.
When Using the Handset
1
If you hear a beep when you answer the call, switch to the Fax mode.
2
Press [
▲
] or [
▼
] to highlight <Start Receiving>, and then press [OK].
3
Hang up the handset.
When Using an External Telephone
1
If you hear a beep when you answer the call, press [ ] and [ ]
(Remote RX ID).
2
Hang up the receiver.
To change the remote RX ID, press [ ] (Menu)  <Fax RX Settings> 
<Fax Settings>  <Remote RX>  <On>, and then specify a remote RX ID.
2
5