Canon imagePROGRAF iPF8400S - Manual (Page 357)

Matching pane Matching pane
On the Matching pane, you can specify color matching to compensate for differences in the appearance of colors on
various devices.
Important
• The Matching pane is not displayed when No color correction or Monochrome is selected in Color Mode.
Note
• To display the Matching pane, on the Main pane click Color Settings by Color Mode in Advanced Settings, and then click
the Matching tab. (See "Main Pane .")
➔ P.351
Driver Matching Mode
The following options are available when you select Driver Matching Mode in the A Matching Mode list.
• A Matching Mode
Select the color matching mode to use, as desired.
Normally, select Driver Matching Mode. For color matching based on ICC profiles, select ICC Matching Mode
depending on your color matching system.
• B Matching Method
Select the color matching method that suits the document to be printed. Various B Matching Method options are
available depending on your selection in A Matching Mode.
• C Color Space
Select the applicable color space as desired.
• D Monitor White Point
Enter the color temperature set on the monitor.
Displayed when the
B Matching Method is set to Monitor Matching.
• E Gamma
You can adjust the gradation of intermediate tones in an image.
2.2 is normally selected. If you want a softer impression than 2.2, select 1.8.
iPF8400S Matching pane
User's Guide
Mac OS Software
Printer Driver
357