Canon imagePROGRAF iPF8400S User Manual
Page 76
9
Access the Page Setup pane.
10
Select and click a roll paper in the
A
Paper Source list.
11
Select the paper width of the roll loaded in the printer for
B
Roll Width. In this case, ISO A2/A3 (420.0mm) is
selected.
12
Make sure the
C
Page Size setting matches the origi-
nal size as selected in
C
Paper Size in the Page At-
tributes dialog box—in this case, ISO A4.
13
Select the
D
Enlarged/Reduced Printing check box.
14
Click
G
Scaling and enter 120.
Note
•
You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of the paper will
not be printed.
•
If the original size after enlargement or reduction is smaller than the paper size, the original is printed in the upper-
left corner. In this case, you can center originals by selecting the
J
Print Centered check box.
15
Confirm the print settings, and then click
M
Print to start printing.
Note
•
For tips on confirming print settings, see "Confirming Print Settings ."
Resizing Originals by Entering a Scaling Value (Mac OS)
iPF8400S
Enhanced Printing Options
Printing enlargements or reductions
76