Creating and registering captions, Cop y – Canon Wireless Transmitter WFT-E5A User Manual

Page 120

Advertising
background image

120

Follow these steps to create captions and register them on the camera, as introduced in
Adding a Caption Before Transfer” (p.39). When creating and registering captions, use a
computer on which EOS Utility is installed.
Before you begin, attach the transmitter to the camera and use the USB cable provided
with the camera to connect the camera to the computer.
For instructions on connecting the
camera to the computer with the USB cable and starting EOS Utility, refer to the Software
Instruction Manual (PDF) provided with the camera. Note that captions cannot be created for
cameras without an attached transmitter.

1

Start EOS Utility and select [Camera
settings/Remote shooting].

X

The camera settings/remote
capture screen is displayed.

2

On the [ ] tab, select [WFT Captions].

X

The screen for caption creation is displayed.

To acquire caption data stored on the camera,
select [Load settings].

3

Enter the caption or captions.

Enter up to 31 characters (in ASCII format).

4

Register the captions on the camera.

Select [Apply to camera] to register your new
captions on the camera.

Creating and Registering Captions

COP

Y

Advertising