Using the wizard to establish a connection, Selecting the wireless network, E p.25 – Canon Wireless Transmitter WFT-E5A User Manual

Page 25: Cop y

Advertising
background image

25

When you select [Connect with wizard], active wireless LAN terminals in your area are listed,
accompanied by information about them. Select the SSID (or ESS-ID) of your desired wireless
LAN terminal.

1

Select [Connect with wizard].

Turn the <5> dial to select [Connect with
wizard
], and then press <0>.

2

Select the wireless LAN terminal.

To select the wireless LAN terminal, press <0>.

Turn the <5> dial to select the wireless LAN
terminal, and then press <0>.

Select [OK] and press <0> to go to the next
screen.

1

Indicates whether the device is in infrastructure or ad hoc mode

2

An icon is displayed if the wireless LAN terminal is encrypting communication

3

Indicates the first 9 characters of the SSID

4

Indicates the channel used

Encryption by Wireless LAN Terminals

If the wireless LAN terminal is encrypting communication, select the corresponding method in
[Authentication] and [Encryption].

[Authentication]: Open system, Shared key, WPA-PSK, or WPA2-PSK

[Encryption]: WEP, TKIP, or AES

[Enter connection] and [Search again]

To configure settings for the wireless LAN terminal manually, select [Enter connection] and
press <0>. Complete the settings for the items displayed, one after another.

To search for wireless LAN terminals again, select [Search again] and press <0>.

Using the Wizard to Establish a Connection

Selecting the Wireless Network

1

2 3

4

COP

Y

Advertising