Canon EOS Rebel T5 18-55 IS II Kit - Manual (Page 83)

83
d: Program AE
Change the ISO speed. Use the built-in flash.
To match the subject and ambient lighting level, you can change the
ISO speed (p.88) or use the built-in flash (p.101). In the <d> mode,
the built-in flash will not fire automatically. When indoors or during
low light shooting, it is recommended that you press the <I> (flash)
button to raise the built-in flash. (You can also raise the built-in flash
by selecting <s> on the Quick Control screen.)
Change the program using Program shift.
After pressing the shutter button halfway, turn the <6> dial to
change the shutter speed and aperture setting combination
(program). Program shift is canceled automatically after the picture
is taken. Program shift is not possible with flash.
Shooting Tips
If the “30"” shutter speed and the lower f/number
blink, it indicates underexposure. Increase the ISO
speed or use flash.
If the “4000” shutter speed and the higher f/number
blink, it indicates overexposure. Decrease the ISO
speed.
Differences Between <d> and <A> (Scene Intelligent Auto)
In the <A> mode, many functions, such as the AF operation and metering
mode, are set automatically to prevent spoiled shots. The functions you can
set are limited. With <d> mode, only the shutter speed and aperture are set
automatically. You can freely set the AF operation, metering mode, and
other functions (p.274).
COP
Y