Canon imagePROGRAF iPF655 - Manual (Page 709)

Paper to Prepare
Rolls • An unused roll at least 10 inches wide
• High-precision ruler
Sheets • One sheet of unused paper of at least A4/Letter size
• High-precision ruler
Perform adjustment as follows.
1.
Load the paper.
• Attaching the Roll Holder to Rolls →P.633
• Loading Rolls in the Printer →P.637
• Loading Sheets in the Printer →P.660
Note
• Always make sure the loaded paper matches the type of paper specified. Adjustment cannot be com-
pleted correctly unless the loaded paper matches the settings.
2.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
3.
Press the OK button.
The Set./Adj. Menu is displayed.
4.
Press ▲ or ▼ to select Adjust Printer, and then press the OK button.
5.
Press ▲ or ▼ to select Feed Priority, and then press the OK button.
6.
Press ▲ or ▼ to select Adjust Length, and then press the OK button.
Adjustments for Better Print Quality > Adjusting the feed amount >
iPF655 Adjusting Line Length (Adjust Length)
7
693