Canon imagePROGRAF iPF655 - Manual (Page 911)

No printhead
Cause Corrective Action
No Printhead is installed. Install the Printhead.
(See "Replacing the Printhead.")
→P.810
Execute printhead cleaning.
Cause Corrective Action
The Printhead
nozzles are clog-
ged. Follow these steps to clean the Printhead.
1. Stop printing by pressing ▲ or ▼ to select Stop Printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.")
→P.809
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.")
→P.810
Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note
that this error may affect the printing quality.
If OK is shown on the Display Screen, clean the Printhead.
1. Press the OK button on the Control Panel to stop printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.")
→P.809
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.")
→P.810
Error Message > Messages regarding printheads >
iPF655 No printhead
13
895