Canon imagePROGRAF iPF655 User Manual

Page 760

Advertising

Setting Item

Description, Instructions

Adjust
Printer

Feed
Priori-
ty

Adj.
Quality

Auto(GenuinePpr)

Specify this mode with paper identified in the Paper
Reference Guide.
The printer prints and reads a test pattern for automat-
ic adjustment of the feed amount. (See "Automatic
Banding Adjustment (Adj. Quality).")

→P.688

Auto(OtherPaper)

Specify this mode with paper not in the Paper Refer-
ence Guide.
The printer prints and reads a test pattern for automat-
ic adjustment of the feed amount. Note that this func-
tion takes more time and consumes more ink than Au-
to(GenuinePpr). (See "Automatic Banding Adjust-
ment (Adj. Quality).")

→P.688

Manual

Use this mode with highly transparent media or other
paper for which Auto(GenuinePpr) or Auto(Other-
Paper) cannot be used.
Print a test pattern for adjustment of the feed amount
based on the type of paper. (See "Manual Banding
Adjustment (Adj. Quality).")

→P.689

Adjust
Length

Adjust-
ment-
Print

A:High

Print a test pattern for particular types of paper to
compensate for paper stretching or shrinkage, after
which you enter the amount of adjustment. (See "Ad-
justing Line Length (Adjust Length).")

→P.692

B:Standard/Draft

Chang
e Set-
tings

A:High

Displayed when you have selected Feed Priority >
Adj. Priority > Print Length.
Adjustment relative to the amount of stretching or
shrinkage of the current paper.
Enter either the adjustment results from Adjustment-
Print or the discrepancy that you measured (as a per-
centage).
For paper that tends to stretch, increase the feed
amount by choosing a higher adjustment value. For
paper that tends to shrink, decrease the feed amount by
choosing a lower adjustment value.

B:Standard/Draft

Main-
te-
nance

Head Cleaning

Clean the Printhead. (See "Cleaning the Printhead.")

→P.809

Choose Head Cleaning A if printing is faint, oddly
colored, or contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or
if printing is not improved by Head Cleaning A.

Nozzle Check

Print a test pattern to check the nozzles.

Replace P.head

When replacing the Printhead, choose Yes and follow
the instructions on the screen. (See "Replacing the
Printhead.")

→P.810

Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.

Repl. maint cart

When replacing the Maintenance Cartridge, choose
Yes and follow the instructions on the screen. (See
"Replacing the Maintenance Cartridge.")

→P.818

Head Info

Indicates information about the printhead.

Control Panel