Power sources, Batteries, Inserting batteries – AGFA ePhoto CL34 User Manual

Page 13: Battery status, Battery care, Batteries inserting batteries

Advertising
background image

Chapter 1: Getting to Know Your Camera

13

Power Sources

Your ePhoto CL34 has two possible power sources:

!

batteries

!

USB power

Batteries

Inserting batteries

Your ePhoto CL34 camera comes with 4 AA Alkaline batteries.

"

Note: You can also use AA NiMH or AA Lithium batteries.

1

Open the door of the battery compartment.

2

Insert 4 AA appropriate batteries. Make sure the pole-marks on the batteries (+ and -)
correspond to those in the battery compartment.

3

Slide the battery compartment door back into place.

Battery status

The Display always indicates the status of the battery. Segments disappear as power is used.

Full

Half-full

Nearly Empty

"

Note: The Nearly Empty-icon indicates that the inserted batteries will power your camera for
only a few minutes more.

Battery care

!

If you are not going to use your camera for an extended period of time, remove the batteries to

prevent leaks or corrosion.

!

Before replacing the batteries, switch OFF the camera.

!

Use only size AA Alkaline, NiMH (with a minimum capacity of 1200 mAh) or Lithium

batteries.

!

Do not use batteries that show signs of leakage, corrosion or swelling.

!

Do not use batteries that are excessively warm.

!

If necessary, clean battery contacts with a dry cloth before installation.

!

Always replace all batteries with four identical, new (or fully charged) ones.

!

Dispose used batteries in a manner that complies with applicable laws.

Advertising