To record images, To record images in burst mode – AGFA ePhoto CL34 User Manual
Page 22
Chapter 2: Recording Images and Videoclips in Record Mode
22
Chapter 2: Recording Images and Videoclips
in Record Mode
Like a conventional camera, the ePhoto CL34 has an optical viewfinder. You can also frame the
image on the color LCD. Before you record images or video clips, make sure to install the batteries.
"
Note: To extend battery life use the optical viewfinder instead of the color LCD for recording
images.
To record images:
1
Slide the PLAY/OFF/REC auto return switch to REC.
2
In case you want to frame an image using the color LCD (instead of using the optical
viewfinder), press the Jog Dial wheel once.
"
Note: To save batteries use the optical viewfinder instead of the LCD.
3
If desired, change the camera settings (for more information, refer to “
” further in this chapter).
4
Frame the image using the optical viewfinder or the color LCD.
5
Press the Shutter button to record the image.
The camera processes the image. The Green Action Indicator on the back of the camera
blinks. If the color LCD is on, the recorded image appears on the LCD. After a few seconds,
the live image reappears on the LCD and the camera is ready to record a new image.
"
Note: If the QuickReview option is on, the color LCD displays menu options while the image is
built-up on the LCD (for more information refer to “
” further in this chapter).
To record images in Burst mode:
1
Slide the PLAY/OFF/REC auto return switch towards REC.
2
Press the Jog Dial wheel.
The LCD screen is switched on.
3
Press the Jog Dial wheel again.
The Record menu appears on the LCD with the Resolution icon highlighted.
4
Scroll by pressing the down arrow of the Jog Dial wheel to select the
icon.
5
Press the Enter button.
The Burst Mode is activated.
6
Press and hold the shutter button continuously to record 3 images/second for 3.5 seconds.
7
Release the shutter button to stop recording.