ADTRAN Express XLT - Manual (Page 110)

Chapter 3: Terminal Menu Operation and Structure
94 Express XL/XLT User Manual 61200070L1-1
IP Routes/Hops - Number of routers that must go through to get
to destination. Ranges from 0-15 or 16 for infinite (can’t get
there from here).
IP Routes/TTL - Seconds until address is removed from table or
“zombied.” Value of 999 means route is static.
Status/IPX Routes
Read security: 5
This lists the contents of the Express XL/XLT’s IPX router table.
IPX Routes /Network - Network destination address
IPX Routes /Gateway - Node or Ethernet address of gateway to
receive this packet
IPX Routes /Port - Port gateway is located on:
local - sent directly to the Express XL/XLT router
eth0 - Express XL/XLT’s ethernet port
wan0 - Express XL/XLT’s first PPP bundle
wan1 - Express XL/XLT’s second PPP bundle
idle - non-connected or “spoofed” route used for dial-on-demand
IPX Routes /Use - Number of times the Express XL/XLT has
referenced the route
IPX Routes/Hops - Number of routers that must go through to get to
destination. Ranges from 0-15 or 16 for infinite (can’t get there
from here).
IPX Routes/Ticks - Router determined value for representing time
packets take to reach the network destination. One tick is equivalent
to one-eighteenth of a second.
IPX Routes/TTL - Seconds until address is removed from table.
Value of 999 means route is static.