ADTRAN Express XLT - Manual (Page 82)

Chapter 3: Terminal Menu Operation and Structure
66 Express XL/XLT User Manual 61200070L1-1
PAP, CHAP or EAP - The connection can be authenticated
using PAP, CHAP or EAP.
CHAP or EAP - The connection can be authenticated using CHAP
or EAP only.
EAP - The connection will only allow authentication by the peer using EAP.
Authentication/Tx Username
Write security: 1; Read security: 3
This is the username that is used when being authenticated by the PPP peer.
Authentication/Tx Password
Write security: 0; Read security: 1
This is the password or secret that is used when being authenticated by the
PPP peer.
Authentication/Rx Username
Write security: 1; Read security: 3
This is the username that is used to match the user to the Connection List pro-
file. During an incoming call, the Express XL/XLT will scan all active connec-
tion profiles and match the received PPP peer’s username. If the name is not
found, then the DEFAULT profile is used, if and only if the DEFAULT profile
has nothing in the Rx Username parameter. During an outgoing call, this user-
name does not have to match the username reported by the PPP peer.
Authentication/Rx Password
Write security: 0; Read security: 1
This is the password or secret that is used to authenticate the PPP peer. This
is only necessary when Configuration/Security/Authentication = Connec-
tion List
.
Authentication/Caller ID
Write security: 1; Read security: 3
Incoming calls can be verified using the ISDN supplied caller identifier when
this is set to Yes. When set to No (def), the caller identifier is not checked.