ADTRAN Express XLT - Manual (Page 91)

Chapter 3: Terminal Menu Operation and Structure
61200070L1-1 Express XL/XLT User Manual 75
PPP/Max Failure
Write security: 3; Read security: 5
Due to the nature of PPP, configuration options may not be agreed upon be-
tween two PPP peers. This value is the number of configuration-naks that
should occur before an option is configuration-rejected. This allows a connec-
tion to succeed that might otherwise fail. The possible values are 5 (def), 10, 15
and 20.
Connection List/Dial Out
The dialing parameters for establishing this connection are defined under this
menu.
Dial Out/Number 1
Write security: 3; Read security: 5
This is the first number used for dialing up this connection.
Dial Out/Number 2
Write security: 3; Read security: 5
This is the second number used for dialing a second B-channel when adding
bandwidth. If BACP/BAP is negotiated, this number is not necessary. If this
number is not specified and BACP/BAP is not used, the Number 1 number is
re-dialed when adding bandwidth.
Dial Out/Call Type
Write security: 3; Read security: 5
The call type can be configured in four different ways:
Speech - Speech directs the call control software to request a
Mu-law encoded speech circuit as the bearer capability for the
outgoing calls. The speech option is used with an ISDN line
configured for voice service. In some areas, voice service costs
less than data services. A speech call type does not always
guarantee an end-to-end digital connection with some local
and long distance carriers.
Audio - Audio directs the call control software to request a
3.1 kHz audio circuit as the bearer capability for the outgoing