Electrolux EQT4520BOG - Manual (Page 16)

8.5 Attaching the seal
1. Clean the worktop around the cut out
area.
2. Attach the supplied seal stripe to the
lower edge of the hob along the outer
edge of the glass ceramic. Do not
extend it. Make sure that the ends of
the seal stripe are located in the
middle of one side of the hob.
3. Add some mm when you cut the seal
stripe to the length.
4. Push the two ends of seal stripe
together.
8.6 Assembly
min.
50mm
min.
500mm
R 5mm
min.
55mm
340 +1 mm
490 +1 mm
www.electrolux.com 16