AT&T 1080 - Manual (Page 10)


Call transfer
Blind transfer
Use this feature to make a blind transfer. While on
a call:
Press [TRANSFER]. The outside call is
automatically put on hold. TRANSFER LINE#Y
TO (with Y being the line in use) appears on the
third line of the display.
Press the one-touch button for the destination
extension.
-OR-
Dial the destination extension number to which
you’re transferring the call. The extension
number appears on the fourth line of the display.
Hang up.
Your phone reminds you with a double-beep
every 0 seconds when a transferred call has
not been answered.
NOTE: If you do not dial an extension within
0 seconds, the transfer automatically cancels. The
call is still on hold. Press the corresponding
LINE
key to resume the call.
Transfer a call and speak to the receiving party
While on a call, press [INTERCOM]. The outside
call is automatically put on hold.
Press the one-touch button for the extension to
which you’re transferring the call.
-OR-
Dial the extension number to which you are
transferring the call. The extension number
appears on the third line of the display.
When the other party answers by pressing
[INTERCOM], you can announce the call.
Press
[TRANSFER].
Hang up.
Answer a transferred call
When you hear a long transfer ring, pick up the
handset or press the
LINE button of the call to use
the speakerphone or headset.
.
.
.
4.
.
.
.
4.
5.
0:0AM /
00:0
0:0AM /
00:0
TRANSFER LINE#
TO
0:0AM /
00:0
0:0AM /
EXT 
INTERCOM TO
PAGE
0:0AM /
EXT 
INTERCOM TO 
0:0AM /
EXT 
TRANSFER LINE #
TO 
0:0AM /
EXT 
TRANSFER FROM 
0:0AM /
EXT 
TRANSFER LINE #
TO