AT&T 1080 - Manual (Page 5)

4
Display screen messages
AC FAIL There is no AC power to the set. If a good battery
is installed, basic phone operation (such as making
and answering calls on the handset) is supported.
Speakerphone, headset and call privacy are not
supported. The handset volume will be at the minimum
level and only the two lowest levels of the ringer
volume will be available.
COVM The telephone is ready to receive a voice mail signal from
your local telephone company.
COVM
   4 There are new voice mail messages.
DND The Do Not Disturb mode is on.
DTAD: XX/YY Flashes when this extension’s mailboxes are full.
XX flashes when there is a new private message (XX is the
total number of private messages).
YY flashes when there is a new central message (YY is the
total number of central messages).
(EMPTY) The directory or one-touch location is empty.
EXT BUSY-AA The auto attendant system is answering a call.
EXT BUSY-REC The answering system is answering a call.
EXT BUSY-REMOTE The answering system is being accessed from another
telephone.
EXT XX RING There is an incoming Centrex call.
FULL! The directory is full.
INITIALIZING. .
The telephone is warming up after having its power
connected.
INTERCOM FROM XX The telephone is receiving a call from extension XX (XX
is the extension number).
(LIST EMPTY) The redial memory is empty.
AA Flash when the 080 extension is an auto attendant.
Continued on next page
DTAD FULL! The recording memory is full. Delete some messages to
make room for more.