AT&T 1080 - Manual (Page 12)


Intercom
Use this feature to make calls between system
phones. An intercom call rings at the extension
called with a repeating double-ring pattern.
Make an intercom call with the handset
. If the one-touch preference is set to
INTERCOM, skip to step .
-OR-
If the one-touch preference is set to
TELEPHONE, press [INTERCOM].
. Press the one-touch button for the party you
wish to call, then lift the handset.
Make an intercom call with the speakerphone
or headset
With the handset in the telephone base:
. If the one-touch preference is set to INTERCOM,
skip to step .
-OR-
If the one-touch preference is set to
TELEPHONE, press [INTERCOM]. The phone
automatically activates the intercom call in
the mode (headset or speakerphone) you
programmed (see the
AUTOMATIC MODE
section of your installation guide ).
. Press the one-touch button of the party you wish
to reach.
If the extension you are calling is idle or set to
Do Not Disturb, you hear long beeps. If the other
extension is on a call, you hear a busy signal.
NOTE: The intercom call automatically cancels
if you do not press a one-touch button within 0
seconds.
0:0AM /
EXT 
INTERCOM TO
PAGE
0:0AM /
EXT 
INTERCOM TO 
0:0AM /
EXT 
INTERCOM TO
PAGE
0:0AM /
EXT 
INTERCOM TO