Bosch HES7282U - Manual (Page 12)

Getting Started
English 8
1. Grasp rack firmly on both sides.
2. Tilt rack up to allow stop into rack guide.
3. Bring rack to a horizontal position and press the rest of the way in. Rack
should be straight and flat, not crooked.
Removing Flat Racks From Oven
1.
Grasp rack firmly on both sides and pull rack toward you.
2. When the stop is reached, tilt rack up and pull the rest of the way out.
Extension Oven Rack (some mod-
els) The Full Extension Rack allows for easier access to cooking foods. The bottom
section extends as far as the standard flat rack. However, the top section extends
beyond the bottom section bringing the food closer to the user.
Removing and Replacing
Note: The full extension rack must be in the closed position when removing and
replacing. Grasp the entire rack (both sections).
1. Grasp the bottom section and pull straight out.
2. Once the stop is reached, grasp the top section and pull straight out until the
second stop is reached. If the top rack will not extend fully, it is not installed
correctly. Reinstall it so that the pan stop is in the back of the oven.
Disassembly (for cleaning)
The two sections of the rack are designed to come apart for easier cleaning.
1. Place rack on flat surface in the closed position top side up.
2. Rotate one side of top rack towards you until it is past the stop (ball).
3. Pull the rack up and out, rotated side first.
Figure 3: Inserting a Rack
Insert rack with the back of the rack
toward the back wall of the range.
Back of rack
Front of rack
Figure 4: Full Extension Rack
Top Rack
Back of Rack Pan Stops
Bottom
Rack
Stops
Top Rack Rest
Rack Guide
Front of Rack
Top Rack
Stop (Ball)