English, Svenska – Electrolux ZSC6920 User Manual

Page 10

Advertising
background image

10

11

22

23

24

25

26

27

28

29

30

31a

31b

Before starting

22 Open the front cover on the machine and check

that the motor filter and the dust container filter

are in place. (See also Maintaining the filters.)

23 Open the back lid on the machine and check that

the exhaust filter is in place.

24 Insert the hose until the catches click to engage

(press the catches to release the hose).

25 Insert the hose into the hose handle until the

catches click to engage (press the catches to

release the hose).

26 Attach the telescopic tube* to the hose handle

and nozzle by pushing and twisting together.

(Twist and pull apart to dismantle.)

(certain models have a lock button that must be

pressed before the hose and telescopic tube can be

pulled apart)

27 Pull out the power cord and connect it to the

mains.

28 To rewind the cord, press the cordwinder pedal.

29 Start the vacuum cleaner by rotating the power

control in the direction of the “Max” position.

Increase suction power by rotating the control

further up to “Max” position. Stop the vacuum

cleaner by rotating in the opposite direction to

“Off” position.

In order to achieve an optimal cyclone effect in the

cleaner, the power regulation should always be in

the “Max” position.

30 Suction power can also be adjusted by using the

suction control on the hose handle.

Ideal parking position for pausing (31a) and stor-

ing (31b).

English

* Certain models only.

Innan du börjar

22 Öppna luckan framtill och se till att motorfiltret

och dammbehållarfiltret sitter där de ska. (Se

även Rengöring/byte av filter.)

23 Öppna luckan baktill och se till att utblåsfiltret

sitter där det ska.

24 Sätt i slangen tills hakarna klickar fast (tryck in

hakarna för att lossa slangen).

25 Koppla ihop slangen med slanghandtaget tills

fästena snäpper fast (tryck på fästena när du vill

koppla loss slangen).

26 Anslut teleskopröret* till slanghandtaget och

munstycket genom att trycka och vrida ihop

dem. (Vrid och dra isär när du vill ta bort rören.)

(På vissa modeller finns det en låsknapp som måste

tryckas ned innan slangen och teleskopröret kan

tas isär.)

27 Dra ut sladden och anslut kontakten till väggut-

taget.

28 Mata in sladden genom att trycka på indrag-

ningspedalen. Då matas sladden in.

29 Sätt på dammsugaren genom att föra kontrollen

mot ”Max”. Öka sugeffekten genom att föra kon-

trollen längre mot ”Max”. Stäng av dammsugaren

genom att föra kontrollen i motsatt riktning till

”Off”.

För att en optimal cykloneffekt ska uppnås i damm-

sugaren bör kontrollen alltid stå i ”Max”-läget.

30 Sugeffekten kan också regleras genom sugkon-

trollen på slanghandtaget.


Perfekt läge vid paus (31a) och förvaring (31b).

* Endast vissa modeller.

Svenska

Advertising