LG DLEX3570W - Manual (Page 34)

34
Cycle modifier buttons
SENSOR DRY cycles have preset settings that are
selected automatically. MANUAL DRY cycles have
default settings, but you may also customize the
settings using the cycle modifier buttons.
Press the button for that option to view and select other
settings.
DRY LEVEL
Selects the level of dryness for the cycle. Press the DRY
LEVEL button repeatedly to scroll through available
settings.
t
5IJT
PQUJPO
JT
POMZ
BWBJMBCMF
XJUI
4&/403
%3:
DZDMFT
t

5IF
ESZFS
XJMM
BVUPNBUJDBMMZ
BEKVTU
UIF
DZDMF
UJNF

Selecting MORE DRY or VERY DRY will increase the
cycle time, while LESS DRY or DAMP DRY will decrease
the cycle time.
t

6TF
B
-&44
%3:
PS
%".1
%3:
TFUUJOH
GPS
JUFNT
UIBU
ZPV

wish to iron.
TEMP. CONTROL
Adjusts the temperature setting from ULTRA LOW
to HIGH. This allows precise care of your fabrics and
garments. Press the TEMP. CONTROL button repeatedly
to scroll through available settings.
TIME DRY
"MMPXT
ZPV
UP
NBOVBMMZ
TFMFDU
UIF
ESZJOH
UJNF

GSPN


UP

NJOVUFT

JO
NJOVUF
JODSFNFOUT
6TF
UIJT
GPS

small loads or to remove wrinkles. Use the MORE TIME/
LESS TIME buttons to add or reduce the drying time in
NJOVUF
JODSFNFOUT
NOTE
To protect your garments, not every dryness level,
temperature, or option is available with every cycle.
See the Cycle Guide for details.
Your dryer features several additional cycle options to
customize cycles to meet your individual needs. Certain
option buttons also feature a special function (see the
following page for details) that can be activated by
pressing and holding that option button for 3 seconds.
To Add Cycle Options to a Cycle:


5VSO
PO
UIF
ESZFS
BOE
UVSO
UIF
DZDMF
TFMFDUPS
LOPC
UP

select the desired cycle.


6TF
UIF
DZDMF
TFUUJOHT
CVUUPOT
UP
BEKVTU
UIF
TFUUJOHT

for that cycle.
3. Press the cycle option button(s) for the option you
would like to add. A confirmation message will be
shown in the display.
4. Press the START/PAUSE button to start the cycle. The
dryer will start automatically.
WRINKLE CARE
Selecting this option will tumble the load periodically for
up to 3 hours after the selected cycle, or until the door is
opened. This is helpful in preventing wrinkles when you
are unable to remove items from the dryer immediately.
SIGNAL
Adjusts the volume of the Signal or turns off the Signal.
Press the button repeatedly until the desired volume
setting is illuminated.
HOW TO USE