LG LRE30453ST - Manual (Page 16)

- 16 -
OPERATION (OPTIONS)
1. Press COOK & WARM for 3
seconds.
2. Press 3. The display will show
BEEP Hi.
3. Press 3 to switch beeper volume
( Hi, Lo, and OFF ).
4. Press START to accept the
desired change.
To set beeper volume
SETTING BEEPER VOLUME
The beeper volume feature allows you to adjust the volumes
to a more acceptable volume. There are three possible
volume levels.
1. Press COOK & WARM for 3
seconds.
2. Press 2. The display will show
Unit F.
3. Press 2 to switch between the F
and C.
4. Press START to accept the
desired change.
To change display from Fahrenheit to Centigrade or
Centigrade to Fahrenheit:
SETTING TEMPERATURE UNIT —
FAHRENHEIT OR CENTIGRADE
COOK & WARM pad control the Fahrenheit or Centigrade
temperature display modes. The oven control can be
programmed to display temperatures in Fahrenheit or
Centigrade. The oven has been preset at the factory to
display in Fahrenheit.
1. Press and hold START for
3 seconds.
2. 2 beeps will sound, DOOR
LOCKED will flash in the display.
Once the oven door is locked the
DOOR LOCKED indicator will stop
flashing and remain on along with
the lock icon( ) light.
To activate the Oven Lockout feature:
1. Press and hold START for 3
seconds. A beep will sound
2 times. The DOOR LOCKED will
continue to flash until the oven
door has completely unlocked and
the lock icon( ) light will clear.
2. The oven is again fully operational.
To reactivate normal oven operation:
SETTING OVEN & COOKTOP
LOCKOUT FEATURE
The START pad controls the Oven & Cooktop Lockout feature.
The Oven & Cooktop Lockout feature automatically locks the
oven door, prevents the cooktop element and most oven
controls from being turned ON. It does not disable the clock,
timer or the interior oven light.
1. Press and hold COOK & WARM
pad for 3 seconds. OPt will be
displayed.
2. Press 1. The display will show CLO
12H.
3. Press 1 to switch between the
12H and 24H.
4. Press START to accept the desired
change.
Changing between 12 or 24 hour time of day
CHANGING HOUR MODE ON
CLOCK (12hr, 24hr)
Your control is set to use a 12-hour clock. If you would prefer
to have a 24-hour time clock, follow the steps below.