LG 37LD665H - Manual (Page 145)

6 206-4200
Commercial Mode Overview
Typical Installer Menu
xxLD66xH PTC INSTALLER MENU
000 INSTALLER SEQ 000
UPN 000-000-000-000 ASIC D279
PTC V1.00.016 CPU V1.21.00
Installer Menu
To set up a Master TV for cloning purposes, you will
need to know how to enter the commercial controller
(PTC) Installer Menu and make changes to the
default values as required. If necessary, familiarize
yourself with the Installer Menu and how to make
and save changes. Refer to pages 15 to 22 for
information on accessing the Installer Menu in Pass-
through Mode and for detailed descriptions of the
Installer Menu items.
TV Setup Menus
On-screen setup menus control the features of the
TV. Use the Installer Remote to access the TV setup
menus, and set the TV features to the desired
configuration for the end user. Refer to the Owner’s
Manual for detailed information on the TV setup
menus.
This document describes how to set up LD660H/LD665H and LV555H Pro:Centric™ TVs for Commercial
Mode operation. LG commercial TV functionality is based on “ownership” of the Channel Map; that is,
the Channel Map resides in the TV’s CPU, Protocol Translator Card (PTC), or embedded b-LAN™ (EBL)
module, or it resides externally from the TV (i.e., in a device from the solution provider).
Each of these TV models has an EBL module that can be configured either for Pass-through Mode
(default) or Free-To-Guest (FTG) Mode. In addition, each of these TVs is capable of FTG Mode operation
via the TV CPU when the EBL is in Pass-through Mode.
Setup Checklist
Note: This document provides information specific to Commercial Mode operation. Refer to the Owner’s
Manual for detailed information on TV installation and hardware and cable connections.
Installation
__ Unpack TV and all accessories.
__ Install batteries in the Installer Remote.
__ Install TV on VESA mount or stand.
Note: It may be advisable to make all cable
connections before installing on VESA mount
or stand, as appropriate.
Hardware Connections
__ Install any additional hardware as
appropriate to your institution, LAN, etc.
Cable Connections
__ Make all rear jack panel and MPI card slot
connections, as appropriate.
Commercial Mode Setup
__ Complete appropriate procedures as described
in this document for Commercial Mode operation.
See “Pass-through Mode” and “FTG Mode”
sections below for further information.
Pass-through Mode
This mode allows you to create a Master TV Setup for cloning purposes for TVs that are to remain in Pass-
through Mode. This mode also allows external control via the GAME CONTROL/MPI port on the TV rear jack
panel. Use the Installer Remote to configure Installer Menu items as required for TV operation and set up TV
features (Channel, Picture, Audio, etc.). See “Master TV Setup” on pages 11 to 14 for detailed information.
TV Setup Menus
PICTURE AUDIO
INPUT OPTION
TIME
USB
CHANNEL
LOCK