LG 22LG3DCH - Manual (Page 89)

CHANNEL
B
ANKS
87
CHANNEL BANKS
CHANNEL BANKS OVERVIEW
(Except 32LG3DC)
Channel Banks Note: Disable all Aux sources in the Installer menu that will not be made available to the end
user.
CH 011-001 NORMAL-ADDED
Enter -> Change
CC ->VCHIP Menu Ch. Preview -> Exit
CHANNEL PREVIEW - BANK 1
C Ch haan nn neell B Baan nkk S Seettu up p M Meen nu u
Channel Banks Overview
Purpose of Channel Banks: Allows the institution administrator to control
access to patient in-room TV programming. A channel bank can be enabled
for a patient for a pre-determined fee. For Banks 1-2 and 3, the institution
can create programming levels. Each level would offer a custom channel line-
up. Top tier would be the most programming (premium etc.), 2nd tier=lesser
programming, 3rd tier=basic programming etc. Channel Bank 4 would dis-
play the ‘Inactive TV Call Attendant’ message when the TV is turned on. The
administrator could activate Banks 1-2 or 3 depending on the programming
tier selected by the patient. When the patient leaves the hospital, the admin-
istrator can then select Bank 4 to reinstate the Inactive TV message.
Channels Available Charts
All channels found in the channel search are included in all channel banks.
Default is for all channels to be active in channel banks 1-2-3 and 4. Create
channel banks charts similar to the examples on the following pages. Show on
the channel bank chart, the status for each channel in all channel banks. This
then becomes the patient entertainment programming offerings plan.
Channel Banks Setup
Operating the Channel Banks menu.
Note: Channel banks can only be set up after the 2-5-5+Menu procedure
has been completed. See remote key functions for channel banks menu on
the following page.
Channel Status Options Available for Channel Banks
In the Ch Preview-Channel Banks menu, use the channel up-down arrows to
go to a channel and the Left-Right arrows to select the channel status. See
channel status chart.
Inactive TV Setup
Go to Channel Bank 4. Select ‘Normal Delete’ for all channels. When the TV
is powered on by the patient, the ‘Inactive TV Call Attendant’ message will
appear on the screen and after a few moments the TV will turn itself off.
With the Installer remote, the administrator can activate Banks 1, 2 or 3
depending on the entertainment programming tier selected by the patient.
When the patient leaves the hospital, the administrator can then select Bank
4 to reinstate the ‘Inactive TV’ message.
Note: Default setting for Aux sources is to be active in the Installer menu. The Aux
sources will appear between the highest Analog and lowest Digital channel number
in the channel scan with Channel Up/Down. If the Aux sources will not be used, it
is advisable to set them to 000 (Off) before doing 2-5-5 + Menu. After doing 2-
5-5 + Menu, the only way to turn the Aux sources off so they will not appear in
the channel scan, is to go to the Channel Bank menus and select ‘Normal Delete’.
Refer to Installer menu items: 35 and 39.
3140OSKZ003AR6
MUTE POWER
BANK GUIDE
CH
PREVIEW
SAP INFO CC
OK
VOL
CH
CH
VOL
FLASHBK
TIMER ALARM MENU
ADJ
ADJ ADJ ADJ
BED1 BED2
Use to access Ch Preview Menu