Using the surface burners, How to light a gas surface burner, Sealed gas burners – LG LSCG366ST User Manual

Page 7

Advertising
background image

7

ENGLISH

Throughout this manual, features and appearance may vary from your model.

• Make sure all grates on the cooktop are properly

placed before using any burner.

• Be sure the burners and grates are cool before you

place your hand, a pot holder, cleaning cloths or

other materials on them.

• Make sure all burners are in place.
• Do not operate the burner for an extended period of

time without cookware on the grate.

The finish on the grate may chip without cookware

to absorb the heat.

HOW TO LIGHT A GAS SURFACE BURNER

• Be sure all the surface

burners are placed in their

respective positions.

• Push the control knob in and

turn it to the LITE positions.

• You can hear a little

CLICKING noise-the sound

of the electric spark ighiting

the burners.

• To control the flame size, turn the knob.

lf the knob stays at LITE, it will continue to click.

• When turning a burner to LITE, all the burners spark.

Do not attempt to disassemble or clean around any

burner while another burner is on. An electric shock

may result, which could cause you to knock over hot

cookware.

The medium(left front & rear) and the large(right front)

burners are the primary burners for most cooking.

These general-purpose burners can be turned down

from HI to LO suit a wide range of cooking needs.
The extra large burner (center) is the maxium output

burner. Like the other four burners, it can be turned

down from HI to LO for a wide range of cooking

appliances.
This burner is also designed to quickly bring large

amount of liquid to a boil.

It has a special UtraHeat

setting designed to be used

with cookware 10 inches or

large pots / pans or use with

the griddle.

The extra large burner(dual)

can also be turned down to

LO for a low simmer setting almost like the small

burner.

SEALED GAS BURNERS

Your cooktop has five

sealed gas burners.

They offer convenience,

cleanability and flexibility

to be used in a wide

range of cooking

applications.

The smallest burner is

in the right rear.

These burners can be turned down to LO for a very

low simmer setting.

They provide precise cooking performance for

delicate foods such as sauces or food that requires

low heat for a long cooking time.

IN CASE OF POWER FAILURE

In case of a power failure, you can light the gas

surface burners on your cooktop with a match.

Hold a lit match to the burner, then push in and turn

the control knob to the LITE position.

Use extreme caution when lighting burners this way.
Surface burners in use when an electrical power

failure occurs will continue to operate normally.

USING THE SURFACE BURNERS

O P E R AT I N G I N S T RU C T I O N S

Push the control knob in and

turn it to the LITE position.

Extra-large

burner only

Extra Large (dual)

Medium

Small

Large

Advertising
This manual is related to the following products: