LG LSC27935SB - Manual (Page 14)

13
USING YOUR REFRIGERATOR
ENSURING PROPER AIR CIRCULATION
In order to ensure proper temperatures, air MUST flow
between the refrigerator and freezer sections.
• Cool air enters the freezer through the vents located
at the top of the compartment and exits through the
vents located behind the freezer drawers.
• Cool air from the freezer section enters the fresh
food section through vents located at the top of the
compartment. The air moves down throughout the
compartment and exits through the vents located
behind the crisper drawers.
• Do not block any of these vents with food packages.
If the vents are blocked, airflow will be interrupted and
temperature and moisture problems may occur.
IMPORTANT: Because air circulates between both
sections, any odors formed in one section will transfer to
the other.
You MUST thoroughly clean both sections to eliminate
odors. To prevent odor transfer and dried out food, wrap
or cover foods tightly. (See the “Food Storage Guide”
section for details).
NOTE: If you close the
refrigerator door, you may see
the freezer door open and
close again due to pressure
from internal air flow.
PRIOR TO USE
1. Clean your refrigerator thoroughly and wipe off dust
accumulated during shipping.
2. Install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed
together to prevent possible damage during shipment.
3. Let your refrigerator run for at least 2 or 3 hours before
putting food in it. Check the flow of cold air in the
freezer compartment to ensure proper cooling. Your
refrigerator is now ready for use.
CONTROL PANEL FEATURES
Press the button for the desire function to review and
select other settings.
LED DISPLAY
The LED display shows the temperature
settings, dispenser options, and the
water filter door alarm and status
messages.
ICE TYPE
The ICE TYPE is used to select cube,
ice or crushed ice.
NOTE: Hold the glass or other container
in place for a couple of seconds after
dispensing ice or water to catch the last
few cubes or drops.
The dispenser is designed not operate
while either refrigerator door is open.
FREEZER
Press the FREEZER button to adjust
the temperature in the freezer
compartment.
REFRIGERATOR
Press the REFRIGERATOR button
to adjust the temperature in the
refrigerator compartment.
NOTE: The actual inner temperature
varies depending on the food status,
since the indicated temperature setting
is the target temperature an not the actual temperature
within the refrigerator.
Initially set the REFRIGERATOR CONTROL at 37 °F
(3°C). Leave it at these settings for 24 hours (one day)
to stabilize. Then adjust the compartment temperature
as illustrates above.
NOTE: When press simultaneously the FREEZER button
and the REFRIGERATOR button for more than 5
seconds, the temperature display will change from
Fahrenheit to Celsius or vice versa.
ICE PLUS
Press this button once to activate the increased ice
making function. The ICE PLUS icon on the display panel
will illuminate when activated. The Ice Plus function runs
the freezer compartment at the coldest settings for a 24
hours period to increase ice making. Press the button
again to cancel the Ice Plus function.
ICE TYPE
CRUSH
CUBE
ICE PLUS
HOLD
3 SECS
MONTH
ICE TYPE
FREEZER
REFRIGERATOR
ICE PLUS
LIGHT/FILTER
ALARM/LOCK
3 SEC
ICE TYPE
FREEZER
REFRIGERATOR
ICE PLUS