LG LrV590S - Manual (Page 18)

HOW TO TURN THE HOM-BOT POWER SUPPLY ON & OFF
To turn the power supply on, turn the HOM-BOT upside down
on a smooth/soft surface and check whether the main power
supply switch is turned on.
If the main power supply switch is turned off, turn on the
switch.
ٙ When turning on the power switch, do not press the button
located at the upper section of the HOM-BOT. Operation of
the button can be delayed.
ٙ Turn off the power switch if the HOM-BOT will not be used
for a long period of time, in order to protect the battery.
ٙ The power switch cover is used for protecting the switch
from the dust. Always keep the cover attached.
When the HOM-BOT is not at the Home Station, and is in
the Stand by mode, press the ‘START/STOP’ button for
more than 1 second. The HOM-BOT will be turned on and
a melody will be sounded.
ٙ If the power is turned on while the HOM-BOT is not at
the Home Station, and nothing is done for ten minutes,
the power supply will automatically turn off to reduce
battery consumption.
Press the START/STOP button for two seconds while the
HOM-BOT is turned on. A melody will sound when the
power is turned off.
Turning on the main power supply
Turning on from Stand By power.
Turning off the power supply
ţ

5IF
QPXFS
DBO
CF
UVSOFE
PGG
EVF
UP
UIF
TUBUJD
FMFDUSJDJUZ
EVSJOH
UIF
PQFSBUJPO
- If the power is turned off, turn off the main power switch and
then turn it back on.
ţ

*G
UIF
QPXFS
DBOOPU
CF
UVSOFE
PO

EP
UIF
GPMMPXJOH

- Turn on the power switch and wait for more than 3 seconds.
- Press the ‘START/STOP’ button when the power switch is
turned on.
- If the power is not turned on or if there is no display but only
the “Ting” sound, put the HOM-BOT on the home station.
- If there is no change even when HOM-BOT is attached to the
home station, press the reset switch located on the rear side
of the home station while the HOM-BOT is attached on the
home station.
Tip
14