Before calling for service – LG LDE3015SB User Manual

Page 44

Advertising
background image

44

BEFORE CALLING FOR SERVICE

(cont')

T RO U B L E S H O OT I N G

Problem

Food does not broil

properly.

Oven temperature too

hot or too cold.

Scratches or

abrasions on cooktop

surface.

Metal marks.

Brown streaks or

specks.

Areas of discoloration

on cooktop.

Oven will not self

clean.

“Crackling” or

“popping” sound.

Oven racks are

difficult to slide.

• Aluminum foil used on the the broiling pan and grid has not been fitted properly and

slit as recommended.

- See the Using the Oven section.

• In some areas the power voltage may be low.

- Preheat the broil element for 5-7 minutes

- See the Broiling Guide, page 26.

• Oven Sensor needs to be adjusted.

- See the adjusting your oven Temperature in option section.

• Coarse particles such as salt or sand between cooktop and utensils can cause

scratches.

Be sure cooktop surface and bottoms of utensils are clean before usage. Small

scratches do not affect cooking and will become less visible with time.

• Cleaning materials not recommended for ceramic-glass cooktop have been used.

See Cleaning The Glass Cooktop in the MAINTENANCE section, page 37~39.

• Cookware with rough bottom has been used. Use smooth, flat-bottomed cookware.

• Scraping of metal utensils on cooktop surface. Do not slide metal utensils on

cooktop surface. Use a ceramic-glass cooktop cleaning creme to remove the marks.

See Cleaning The Glass Cooktop in the MAINTENANCE section, page 37~39.

• Boilovers are cooked onto surface. Use the blade scraper to remove soil. See

Cleaning The Glass Cooktop in the MAINTAINANCE section, page 37~39.

• Mineral deposits from water and food. Remove using a ceramic-glass cooktop

cleaning creme. Use cookware with clean, dry bottoms.

• The oven temperature is too high to set a self clean operation.

- Allow the range to cool and reset the controls.

• Oven controls improperly set.

- See the using the self cleaning oven section.

• A self clean cycle cannot be started if the oven lockout feature is active.

• This is the sound of the metal heating and cooling during both the cooking and Self

Clean functions.

- This is normal.

• Apply a small amount of vegetable oil to a paper towel and wipe the edges of the

ovenracks with the paper towel.

Possible Causes / Solutions

Advertising
This manual is related to the following products: