LG LDE3015SB - Manual (Page 20)

20
How to adjust the oven thermostat
(For both the Upper & Lower ovens)
You may find that your new oven cooks differently
than the one it replaced. Use your new oven for a few
weeks to become more familiar with it. If you still think
your new oven is too hot or too cold, you can adjust
the thermostat yourself.
Do not use thermometers,such as those found in
grocery stores, to check the temperature setting of
your oven. These thermometers may vary 20–40
degrees.
NOTE:
This adjustment will not affect the broiling or the Self
Clean temperatures. The adjustment will be retained
in memory after a power failure.
The oven temperature can be increased (+) or
decreased (-) as much as 35°F or 19°C.
NOTE:
Once the temperature is increased or decreased, the
display will show the adjusted temperature until it is
readjusted.
To Adjust the Oven Temperature
(For the Lower oven only)
➊ Touch SETTING pad 2 times for the
lower oven, "L-AJ" will appear in
the display.
➋ Using the number pad enter the
temperature correction you wish
to adjust. Example: to adjust the
oven temperature UP 15 degrees,
touch 15.
➌ Touch START pad to accept the
change.
➍ To lower the oven temperature
enter 15 then touch SETTING pad
to DECREASE the temperature,
(for - value).
➎ Touch START pad to accept the
change.
(For the Upper oven only)
➊ Touch SETTING pad 3 times for
the lower oven, “U-AJ" will appear
in the display.
➋ Using the number pad enter the
temperature correction you wish
to adjust.
Example: to adjust the oven
temperature UP 15 degrees,
touch 15.
➌ Touch START pad to accept the
change.
➍ To lower the oven temperature
enter 15 then touch SETTING pad
to DECREASE the temperature,
(for - value).
➎ Touch START pad to accept the
change.
O P E R AT I N G I N S T RU C T I O N S
SPECIAL FEATURES OF YOUR OVEN CONTROL
Your new touch pad control has additional features that you may choose to use. The following pages
describe these features and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day.
They remain in the control’s memory until the steps are repeated.
When the display shows your choice, touch the START pad. The special features will remain in memory after a
power failure.
SETTING
SETTING
START
LOCKOUT
START
LOCKOUT
START
LOCKOUT
START
LOCKOUT
SETTING
SETTING
1 5
1 5