LG GD570 User Manual
Page 121
119
Change Codes
Security Code
The Security Code feature allows you to change
your current Security Code to a new one. You must
enter the Security Code before you can specify a
new one.
Note: The current Security Code is the Security
Code you created on initial use of a password
feature. The default Security Code is “0000”, if
you didn’t change it before.
Once you enter a new Security Code, you are asked
to confirm it by entering it again.
Note: If you change your Security Code, be sure
to write it down and keep it in a safe place. If you
forget your Security Code, your phone will require
service to have it unlocked.
PIN 1
This feature allows you to change your current PIN
1, provided that the PIN Code Request feature is
enabled. You must enter the current PIN 1 before
you can specify a new one.
Once you have entered a new PIN 1, you are asked
to confirm it by entering it again.