Sleep timer setting, Dimmer, Mute – LG LHT754 User Manual

Page 24: Selecting input source, Xts/xts pro, Virtual sound, Sound mode

Advertising
background image

24

Sleep Timer Setting

You can set the DVD/CD Receiver to turn off
automatically at a specified time.

1. Press SLEEP to set the desired sleep time.

The SLEEP indicator and the sleep time appears in the
display window.

2. Each time you press SLEEP the setting

changes in the following order.
SLEEP 180

150

120

90

80

70

60

50

40

30

20

10

OFF (No display)

Note:

You can check the remaining time before the DVD/CD
Receiver turns off.
Press SLEEP. The remaining time appears in the
display window.

Dimmer

This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER repeatedly.

Mute

Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, the “MUTE” indicator flashes in
the display window.

Selecting input source

You can use VCRs or other units connected to the AV
IN or Optical connector. Refer to the Owner’s Manual
supplied with the unit for further information on the
operation.
Press AUX repeatedly on the Remote Control to
select the desired input source.
Each time you press this button, the mode of the
function changes in the following sequence:

AUX : for selecting the analog signal from AUX AUDIO
Input (L/R) Connector.

AUX OPT: for selecting the optical digital signal from
OPTICAL IN Connector.

AUDIO IN: for selecting the analog signal from AUDIO IN
Connector.

Notes

The Optical input function is available only when the
sampling frequency of other unit is 32 - 96kHz.
You can also select the input source by pressing
FUNC. button on the front panel.
Press and hold this button for about 3 seconds,
then press repeatedly to select other function.

XTS/XTS pro

Each time you press XTS pro the setting changes in
the following order.

XTS ON

NORMAL

XTS-P ON...

XTS-P ON
The unique sound quality of the LG Technology
creates the optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.
XTS ON
When playing a movie with weak bass relative to
the general music, it forces sound to the woofer.
In the mode of 2 CH BYPASS, It creates the high
display effect by playing the sound source via the
rear speakers same as the front speakers.

Note

The XTS mode is temporarily disabled when changing from
2.1 CH to 5.1 CH and it is enabled when changing it to 2.1
CH.

NORMAL
XTS-P and XTS mode tune off

VIRTUAL sound

Press VSM to set the VIRTUAL sound.

3D STEREO

Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.

Multichannel sound

The Multichannel sound changes the sound in 5.1
ch into a virtual one in the 10.1 ch so that it
provides such a feeling that you listen to the sound
simultaneously from the right and left speakers and
center speaker.

Sound Mode

You can enjoy surround sound simply by selecting
one of the pre-programmed sound fields according to
the program you want to listen to. (2 ch. sound only)

Press SOUND button repeatedly.
The sound mode is changed in the display window in
the following order.
BYPASS

ON STAGE

STUDIO

CLUB

HALL

THEATER 1

CHURCH

PL ll MOVIE

PL ll MUSIC

PL ll MTRX

BYPASS...

Note:

Initial sound mode is BYPASS.

Source

Display

Effect

2.1 ch.

VIRTUAL

3D STEREO

5.1 ch

VIRTUAL

Multichannel sound

Advertising