Control panel (non-steam models) cycles – LG LDF8874ST User Manual

Page 10

Advertising
background image

10

PARTS AND FEATURES

CONTROL PANEL (non-steam models)

Cycles

Select your desired cycle.

Auto

This cycle senses the load size, soil amount and soil tough-
ness. This cycle is optimized to achieve the best cleaning.

Heavy

This cycle is for heavily and hard soiled dishes.

Delicate

The cycle is intended for effectively cleaning delicate items
such as fine china and stemware.

Dual Control

This cycle washes the upper and lower racks at different spray
intensities. The default setting for this cycle washes the low-
er rack with strong spray intensity and the upper rack with
soft spray intensity. This provides optimum cleaning perfor-
mance for mixed loads, including fine china and stemware. If
other combinations are desired, use the steps listed below to
change the intensities or to use the Half Load feature.

How To Use Dual Control:

1. Select Dual Control.

2. Press the Spray button to toggle between Soft, Medium

and Strong for the upper spray arm.

3. After making your selection for the upper spray arm, press

the Half Load button.

4. Press the Spray button to toggle between Soft, Medium

and Strong for the lower spray arm.

5. Close the door to start the cycle.

Normal

This cycle is for normally soiled, everyday loads.

Quick & Dry

This is a shortened cycle that is intended for washing and dry-
ing recently used dishes or lightly soiled loads. During this
cycle, both spray arms will run at the same time.

Rinse Only (LDS5774)

This cycle is a quick rinse for dishes that will not be washed
immediately. This cycle will rinse dishes that have excess soil
to soften dried on residue. Rinsing the dishes will help pre-
vent odors in the dishwasher. No detergent should be used.

CHIME ON/OFF

To enable or disable the chime, first, turn on the dishwasher.
Press and hold the Delicate and Quick&Dry Buttons (LDS5774:
Spray and Delay Start) simultaneously for approximately
three seconds.

TO CANCEL A CYCLE

To cancel a cycle, open the door and then press and hold the
Delicate and Dual Control Buttons (LDS5774: Spray and Half
Load) together for approximately three seconds. The drain
pump will activate and the cycle will cancel. The display will
show “dr” and the dishwasher will drain the water. After the
dishwasher is drained, the power will turn off.

If the power is turned on and no cycle has been selected, the
dishwasher will power off within four minutes.

Display varies by model (LDF7774)

Display varies by model (LDS5774)

+TIZ][<W]KP8T][-6/ีුጎჭᅎ8TI\Mၦხ࿨ཅ૬໏ᅰ

<ZI][M:MNZM[P;\MIUၦხ࿨ཅ૬໏ᅰ

<ZI][M:MNZM[P6WV[\MIUၦხ࿨ཅ૬໏ᅰ

Advertising