LG LCV800R - Manual (Page 17)

17
ENGLISH
CARE & CLEANING
Removing Clogs
If you notice a loss in suction, first check the filters
as described on Page 15 and 16. If the filters are
clean, there may be a clog. The arrows show areas
where clogs are most likely to occur.
To check for clogs:
1. Check the hose where it connects to the canister
by pressing the release button on the top end of
the hose.
2. Check the nozzle where it connects to the wand
by pressing the nozzle release button.
3. Remove the dust separator and check the dust
separator inlet where it connects to the canister.
4. Separate the wand and hose and check for
clogging.
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before
servicing. Failure to do so could result in
electrical shock or personal injury.
WARNING
Fitting Pipe
Flexible Hose
Release Button