LG LUV350P - Manual (Page 8)

ENGLISH
8
ASSEMBLY
Attaching the Hose
1. Attached the top side of the hose to the handle. The top side of the
hose can be recognized by the two holes.
Accessory Storage
Your vacuum cleaner features convenient on-board storage for the
dusting brush & crevice tool.
y Insert the dusting brush & crevice tool onto the main body
2. Insert the bottom side of the hose to the main body. The bottom side
of the hose can be recognized by the two release clips.
3. Clip the hose into its holder on the back side of the vacuum.
WARNING
Personal injury and Product Damage Hazard! DO NOT use
outlets above counters. Not following this warning could
result in damage to the surrounding items.
Cord Storage
To store the cord:
1. Make sure the cord hanger is in the UP position.
2. Wrap the cord around the cord hanger and hook into place. Clip the
plug onto the cord.
NOTE: To reduce the risk of electric shock, this vacuum cleaner has a
polarized plug; one blade is wider than the other. This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not change the plug in any way.
To release the cord:
1. Rotate the upper cord holder to the DOWN position.
2. Unclip the plug and extend the cord.