Asus NCCH-DR - Manual (Page 27)

A S U S N C C H - D R A S U S N C C H - D R A S U S N C C H - D R A S U S N C C H - D R A S U S N C C H - D R 2 - 7 2 - 7 2 - 7 2 - 7 2 - 7
Using the CEK springs Using the CEK springs Using the CEK springs Using the CEK springs Using the CEK springs
Two CEK springs come with the
motherboard package. You can also
use these springs to support the
weight of the CPU heatsinks. Take
note of the four CEK spring hooks
located beside the screw holes.
2. Position the CEK spring
underneath the motherboard,
then match the CEK spring
hooks to the CPU1 heatsink
holes.
3. Press the upper spring hooks
inward, then insert to the upper
CPU heatsink holes until they
snap in place.
To install the CEK spring:
1. Locate the CPU heatsink holes
on the motherboard.
C E K s p r i n g h o o k C E K s p r i n g h o o k C E K s p r i n g h o o k C E K s p r i n g h o o k C E K s p r i n g h o o k