Asus NCCH-DR - Manual (Page 97)

A S U S N C C H - D R A S U S N C C H - D R A S U S N C C H - D R A S U S N C C H - D R A S U S N C C H - D R 4 - 3 5 4 - 3 5 4 - 3 5 4 - 3 5 4 - 3 5
Hot Key Power On [Ctrl-F1] Hot Key Power On [Ctrl-F1] Hot Key Power On [Ctrl-F1] Hot Key Power On [Ctrl-F1] Hot Key Power On [Ctrl-F1]
Allows you to set a hot key combination to turn the system power on.
Configuration options: [Ctrl-F1] ... [Ctrl-F12]
To configure this item, you should set the P o w e r O n F u n c t i o n P o w e r O n F u n c t i o n P o w e r O n F u n c t i o n P o w e r O n F u n c t i o n P o w e r O n F u n c t i o n item
to [Hot Key].
Resume by Alarm [Disabled] Resume by Alarm [Disabled] Resume by Alarm [Disabled] Resume by Alarm [Disabled] Resume by Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is enabled, you can set the date and time of alarm using the two
following items. Configuration options: [Disabled] [Enabled]
Date (of Month) Alarm [0] Date (of Month) Alarm [0] Date (of Month) Alarm [0] Date (of Month) Alarm [0] Date (of Month) Alarm [0]
To set the date of alarm, highlight this item and press <Enter> to display a
pop-up menu. Key-in a value within the specified range then press <Enter>.
Configuration options: [Min=0] [Max=31]
Time (hh:mm:ss) Alarm [0 : 0 : 0] Time (hh:mm:ss) Alarm [0 : 0 : 0] Time (hh:mm:ss) Alarm [0 : 0 : 0] Time (hh:mm:ss) Alarm [0 : 0 : 0] Time (hh:mm:ss) Alarm [0 : 0 : 0]
To set the time of alarm:
1. Highlight this item and press <Enter> to display a pop-up menu for the
hour field.
2. Key-in a value (Min=0, Max=23), then press <Enter>.
3. Press tab to move to the minutes field, then press <Enter>.
4. Key-in a minute value (Min=0, Max=59), then press <Enter>.
5. Press tab to move to the seconds field, then press <Enter>.
6. Key-in a value (Min=0, Max=59), then press <Enter>.