Alliance Laundry Systems BF50PV - Manual (Page 46)

Installation
44
F232058
Wet Clean Processing
For wet clean processing, program the
standard test cycle to verify proper operation
of the wet clean system. (Refer to the Cabinet
Freestanding Operation/Programming
manual.)
Run the test cycle and verify that the wet clean
system is operating properly:
• Check plumbing connections for leaks.
• Verify that the Premium Wet Clean
Module pump is operating properly, and
that the rotation direction is
counterclockwise. If rotation direction is
incorrect, a qualified electrician may
reverse any two leads. See Step 6i of
Premium Wet Clean Module installation
section.
• Verify that the drain valve on the Premium
Wet Clean Module opens and closes
properly.
• Verify that the canister lid does not leak.
If problems arise during the control function
test, stop the washer-extractor and return to the
Premium Wet Clean Module installation
section for proper installation of components
and wiring.