AMD AN9 32X - Manual (Page 38)

- Beep Enable
Use <Space> key to enable warning beeps function. If the voltage of corresponding element is
higher/lower than the high/low limit, warning beeps will sound.
- High/Low Limit
These items set the high and low voltage limit.
※ The value of high limit must be set above the one of low limit.
Fan Speed Monitoring
Click <Enter> key to enter its submenu:
µGuru Utility V1.00
ABIT EQ
Fan Speed Monitoring
Reading Shutdown
Enable
Beep
Enable Low
Limit
(*)CPU FAN Speed 7440 RPM (*) (*) 300 RPM
( )SYS FAN Speed N/A ( ) ( ) 300 RPM
( )AUX1 FAN Speed N/A ( ) ( ) 300 RPM
( )AUX2 FAN Speed N/A ( ) ( ) 300 RPM
( )AUX3 FAN Speed N/A ( ) ( ) 300 RPM
( )AUX4 FAN Speed N/A ( ) ( ) 300 RPM
↓↑→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
CPU/SYS/AUX1~4 FAN Speed
These items display the speed of the fans connected to CPU, SYS, and AUX1~4 FAN headers.
- Shutdown Enable
Use <Space> key to enable system shutdown function. Once the system has detected that the
fan speed is lower than the low limit value, system will shutdown automatically.
- Beep Enable
Use <Space> key to enable warning beeps function. If the fan speed is lower than the low limit
value, warning beeps will sound.
- Low Limit
These items set the low limit of fan speed.
3-6 AN9 32X