Aiwa NSX-AJ20 - Manual (Page 14)

14
ENGLISH
DUBBING A TAPE MANUALLY
• Set the tape to the point where recording will start.
• Note that recording is done on only one side of the tape.
1 Press TAPE DECK 1/2.
2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert the tapes with the sides to be played back or recorded
on facing out from the unit.
3 Press TAPE DECK 1/2 to select deck 1.
“TP 1” is displayed.
4 Press w REC/REC MUTE to start recording.
Playing and recording start simultaneously.
To stop dubbing
Press s .
DUBBING THE WHOLE TAPE
This function allows you to make exact copies of the original
tape.
• Dubbing does not start from a point halfway in the tape.
• Note that recording is done on only one side of the tape.
1 Press TAPE.
2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded
on facing out from the unit.
3 Press SYNC DUB to start recording.
The tapes are rewound to the beginning of the front sides,
and recording starts.
To stop dubbing
Press s .