Clock and timer pg. 15, Setting the clock – Aiwa XR-M55 User Manual
Page 25
To change the program of each side
Press MODE to select side A or B, and press
to clear the program on the selected side. Then program tracks
again.
To clear the edit program
Press
twice so that "EDIT" disappears on the display.
• Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.
• Up to 30 tracks can be programmed from anyh of the inserted disc.
CLOCK AND TIMER pg. 15
SETTING THE CLOCK
Set the clock during power on.
1 Press DISPLAY on the remote control and press
within 4 seconds.
The display flashes.
2 Press
or
to designate the time, then press
.
Each time
or
is pressed the time changes by 1 minute. To change the time by 30 minutes, press and hold
down
or
.
• MULTI JOG is also available instead of
and
.
To display the current time