Asus Dual TualatinTM Motherboard TRL-DLS - Manual (Page 29)

29
3. HARDWARE SETUP
ASUS TRL-DLS User’s Manual
3. H/W SETUP
Connectors
8) SMBus Connector (6-1 pin SMB)
This connector allows you to connect SMBus (System Management Bus) devices.
SMBus devices communicate by means of the SMBus with an SMBus host and/
or other SMBus devices. SMBus is a specific implementation of an I
2 C bus,
which is a multi-device bus; that is, multiple chips can be connected to the same
bus and each one can act as a master by initiating data transfer.
9) ASMC Connector (50-pin eRMC )
This connector allows you to connect the optional ASMC-LE, ASMC-ME, or
ASMC-HE card using an ASMC interface cable. Install the ASMC card into the
PCI6 slot and connect the cable from the card to this connector. The PCI6 slot on
the motherboard has a Low Pin Count (LPC) signal connector to accommodate
the ASMC card.
TRL-DLS
®
TRL-DLS SMBus Connectors
SMB
1
SMBCLK
Ground
SMBDA
T
A
+5V
FLOA
TING
TRL-DLS
®
TRL-DLS ASMC Connector