HP ProLiant Support Pack (User Guide) User Manual
Page 34
Possible values
Description
Parameter
health application loads. (Applies to Linux
PSP only.)
Determines whether the HP Systems Insight
Manager Storage Agent is started when the
CMASTARTSTORAGEAGENT
•
YES
(start the storage agent)
•
NO
(do not start the storage agent)
health application loads. (Applies to Linux
PSP only.)
Determines whether the HP Systems Insight
Manager NIC agent is started. (Applies to
Linux PSP only).
CMASTARTNICAGENT
•
YES
(start the web agent)
•
NO
(do not start the web agent)
Determines whether the HP Lights-Out
management driver is started when the
CMANOTAINTEDKERNEL
•
YES
(start the HP Lights-Out
management driver)
health application loads. (Applies to Linux
PSP only.)
•
NO
(do not start the HP Lights-Out
management driver)
VCRM name
Informs the VCA of the name of the VCRM
to use as a software distribution repository.
(Applies to Linux PSP only.)
HPVCAVCRMSERVER
VCA login ID
This parameter is the login ID that the VCA
uses to communicate with the VCRM.
(Applies to Linux PSP only.)
HPVCAVCRMLOGINID
VCA login password
This parameter is the password for the login
ID specified in the HPVCAVCRMLOGIN
parameter. (Applies to Linux PSP only.)
HPVCAVCRMLOGINPASSWD
YES
, NO (default)
HP Systems Management Homepage
(hpsmh) uses this parameter to force
FORCE-OVERWRITE
overwrite the SMH settings of an existing
configuration file.
Up to five Linux groups, separated
by spaces or semicolons, to enable
HP Systems Management Homepage
(hpsmh) uses this parameter to set up security
ADMIN-GROUP
administrative access to the web
services.
for the web server. (Applies to Linux PSP
only.)
Up to five Linux groups, separated
by spaces or semicolons, to enable
user-level access to the web servers.
HP Systems Management Homepage uses
this parameter to set up security for the web
server. (Applies to Linux PSP only.)
USER-GROUP
Up to five Linux groups, separated
by spaces or semicolons, to enable
HP Systems Management Homepage uses
this parameter to set up security for the web
server. (Applies to Linux PSP only.)
OPERATOR-GROUP
operator-level access to the web
servers.
YES
, NO (default)
Determines whether an anonymous user can
access HP Systems Management Homepage.
(Applies to Linux PSP only.)
ANONYMOUS-ACCESS
YES
, NO (default)
HP Systems Management Homepage uses
this parameter to determine whether HP
IP-BINDING
SMH can use all available NICs and detect
subnets for its web services. (Applies to Linux
PSP only.)
IP address pairs separated by
semicolons (for example,
10.1.1.1/255.255.255.0;
HP Systems Management Homepage uses
this parameter to restrict the NICs and
subnets to use for its web servers.
The IP-BINDING parameter must be set to
yes
for this parameter to be used during
installation. (Applies to Linux PSP only.)
IP-BINDING-LIST
10.2.2.2/255.255.255.0)
34
Advanced topics