Clearing copier/scanner jams, Clearing, Copier/scanner jams – HP Laserjet 1200 User Manual
Page 158
156 Chapter 10 Troubleshooting the copier/scanner
EN
Clearing copier/scanner jams
Occasionally, media becomes jammed during a scan or copy job.
Some of the causes include the following:
●
The input trays are loaded improperly. See
for instructions.
●
The original is too small or too large to feed correctly through
the copier/scanner. See
Supported media sizes and types
for
more information.
●
The original exceeds the maximum page length. See
Supported media sizes and types
for more information.
●
The media does not meet Hewlett-Packard specifications.
See
for more information.
An error message appears on your computer screen when a jam
occurs.
Note
When you add new originals, always remove the originals from the input
tray and straighten the stack of new originals.