Audiovox P-947 - Manual (Page 3)

-3-
1
POWER ON-OFF (POWER) BUTTON
Press this button to turn the unit on or off. If the ignition switch is
“on”, the unit will also turn on automatically when the BAND button
or CD Play/Pause button is pressed. When the button is pressed
and held to turn the unit off, the time of day is momentarily dis-
played.
2
AUDIO (VOL.) CONTROL
To increase the volume level, rotate the VOL. control clockwise
(CW). The volume will increase and the level will be shown on the
display panel from VOL MIN (0) to VOL MAX (50). To decrease
the volume level, rotate the VOL. control in the counterclockwise
(CCW) direction. The display will automatically return to the normal
indication 5 seconds after the last volume adjustment or when an-
other function activated. This control is also used in conjunction with
the Select (SEL) button
3
to adjust the bass, treble, balance and
fader levels as described in
4
,
5
,
6
and
7
.
3
PUSH SELECT CONTROL BUTTON (SEL)
This button is used to select the audio function (volume, bass,
treble, balance, or fade) whose setting is adjusted using the VOL.
control
2
. Pressing the SEL button once will set the unit for bass
adjustment (BAS will appear on the display panel) . Pressing the
button additional times will select treble adjustment (TRE on the
display), balance (BAL), or fader (FAD). The display will
automatically return to the normal indication 5 seconds after the
last adjustment or when another function is activated.
4
BASS CONTROL
To adjust the bass level first select the Bass mode by pressing the
SEL button 3
so the BAS indication appears on the display panel.
Within 5 seconds of choosing the Bass mode, rotate the VOL.
control 2
CCW to decrease the bass response, or rotate the VOL.
OPERATING INSTRUCTIONS
15
9
12
11
22
23
(BEHIND PANEL) 18 17
20
13
1
25 26
16
27
21, 28, 29
3, 4, 5, 6, 7
2
19
10
8
14
30
24
OPEN CD PLAY/PAUSE
BAND
T/F
SCAN
P-947
POWER
VOL.
TUN
TUN HI-POWER 40W X 4
AS
LOC
SEL 1 TOP INT 2 RPT 3 RDM 4 5 6 MUTE
LOUD
CD-R PLAYBACK