Audiovox P-947 - Manual (Page 7)

-7-
frequency. If no buttons are pressed during the scan, the unit will
continue to scan the band in use until all six channels are entered.
In local (LOC) mode, pressing and holding the button for longer
than 2 seconds will activate the STORE tuning feature which will
automatically scan and enter up to 6 local area stations into the pre-
set memories on the band in use.
If you have already set thepre-set memories to your favorite stations,
activating the Auto-Store Tuning feature will erase those stations
and enter the new local ones. This feature is most useful when
traveling in a new area where you are not familiar with the local
stations.
cm
DISC SLOT
With the label surface facing up, gently insert the disc into the slot until
the soft-loading mechanism engages. Disc play begins when the front
panel is returned to the normal upright and locked position. The
indication illuminates and becomes animated, CDP ON appears mo-
mentarily followed by momentary display of READING; then the track
number and elapsed time appears on the display panel. TRACK ap-
pears directly above the CD track number to the right of the elapsed
time readout.
CAUTION: This unit is designed for play of standard 5" (12cm) Com-
pact Discs ONLY. Do not attempt to use 3" (8cm) CD-
Singles in this unit, either with or without an adaptor, as
damage to the player and/or disc can occur. Such dam-
age will not be covered by the Warranty on this product.
cn
TRACK SELECT
These buttons are used to quickly select the beginning of a particular
track. With each momentary tap of the Forward Track Select button
( ), the next higher track number will be selected. Similarly, with
each momentary tap of the Backward Track Select button ( ),
the next lower track number will be selected.
co
CUE/REVIEW FUNCTIONS
High-speed audible search to any section of the disc can be made
by the Cue and Review functions. Press and hold the Cue button
(
) to advance rapidly in the forward direction or the Review
button ( ) to advance rapidly in the backward direction. During
either function, the elapsed time within each track will automatically
be shown on the display panel.
cp
TRACK ONE POSITION (TOP)
During disc play, pressing this button returns to the beginning of the
first track on the disc currently being played. The TRACK number
01 will appear on the display panel.
cq
TRACK INTRODUCTION (INT) SCAN SELECT
During disc play, press this button to play the first 10 seconds of
each track on the disc (INT) will appear on the display panel).
When a desired track is reached, press the INT button again to
cancel the function (INT will disappear from the display panel) and
play of the selected track will continue. Intro Scan mode will also
be canceled by activating Repeat Play
cr
or Random Play
cs
cr
REPEAT PLAY (RPT) SELECT
During disc play, press this button to repeat the play of the selected
track (RPT will appear on the display panel). Play of the track will
continue to repeat until the button is pressed again and the RPT
indication disappears from the display panel. Repeat Play mode
will also be canceled by activating the Intro Scan
cq
or Random
Play
cs
f unctions.