Audiovox P-947 - Manual (Page 8)

when in the normal upright and locked position, to indicate that a disc
is loaded in the player. Play of the disc will then automatically begin
from the first track on the disc.
If the front panel is folded down and disc play stops, but the disc is not
ejected, disc play will resume from the point of interruption when the
front panel is returned to the upright and locked position.
NOTE: Never leave a disc engaged in the player when not in use.
Doing so can cause damage to the disc and/or mechanism
of the unit. Always press the eject button and remove the
disc when leaving the vehicle.
dl
FRONT PANEL RELEASE BUTTON (OPEN)
This button is used to release the front panel to the fold-down
position. To detach the front panel, press the button so that the
panel drops to the lowered position. Apply slight pressure to the
inner right corner of the panel and disengage the right side from the
ball mechanism by pulling the panel toward you; then disengage
the left side and remove the panel from the radio. To re-attach the
panel, engage the panel socket on the left side first; then press the
right side straight onto the chassis until the ball mechanism engages
the right socket.
-8-
cs
RANDOM PLAY (RDM) SELECT
During disc play, press this button to play the tracks on the disc in a
random shuffled order (RDM will appear on the display panel). In Random
Play mode, the Track Sselect function
cn
will also select tracks in the
random order instead of the normal progression. The Random Play mode
can be canceled by pressing the button again (RDM indication will disappear
from the display panel) or by activating the Repeat Play
cr
or Intro
Scan
cq
functions.
ct
THEFT-DETERRENT LED
Located on the chassis behind the front panel, a light-emitting diode
(LED) will flash when the panel is physically removed. The flashing
light serves as a visual warning to the would-be thief that the unit has
been disabled by removal of the front panel.
cu
DISC EJECT ( )
During CD player operation, disc play is stopped when the front panel
is folded down; the disc can then be ejected when this button on the
front of the chassis is pressed. If the disc is not removed from the unit
within approximately 12-15 seconds of being ejected, it will
automatically be re-loaded into the unit to prevent it from being
accidentally damaged. The icon will appear on the display panel,