HP ProLiant DL145 G3 Server - Manual (Page 52)

Troubleshooting 52
o CONFIG.SYS
o STARTUP.CMD
o SYSLEVEL information in detail
o TRAPDUMP information (if a TRAP error occurs)
• A directory listing of:
o C:\
o C:\OS2
o C:\OS2\BOOT
o HPFS386.INI (for Advanced or Advanced with SMP)
• If HP drivers are installed:
o Version of the SSD used
o List of drivers from the SSD
o Versions of the OS/2 Management Insight Agents, CPQB32.SYS, and OS/2 Health Driver use
• The drive subsystem and file system information:
o Number and size of partitions and logical drives
o File system on each logical drive
• Warp Server version used and:
o Whether Entry, Advanced, Advanced with SMP, or e-Business
o All services running at the time the problem occurred
• A list of each third-party hardware component installed, with the firmware revisions
• A list of each third-party software component installed, with the versions
• A detailed description of the problem and any associated error messages
Sun Solaris operating systems
Collect the following information:
• Operating system version number
• Type of installation selected: Interactive, WebStart, or Customer JumpStart
• Which software group selected for installation: End User Support, Entire Distribution, Developer
System Support, or Core System Support
• If HP drivers are installed with a DU:
o DU number
o List of drivers in the DU diskette
• The drive subsystem and file system information:
o Number and size of partitions and logical drives
o File system on each logical drive
• A list of all third-party hardware and software installed, with versions
• A detailed description of the problem and any associated error messages
• Printouts or electronic copies (to e-mail to a support technician) of: