HP ProLiant Network Adapter Scripting Utility (User Guide) User Manual
Page 13
Configuration properties 13
•
IPChecksumOffloadIPv4 describes whether the device enabled or disabled the calculation of IPv4
checksums.
•
IPChecksumOffloadIPv6 describes whether the device enabled or disabled the calculation of IPv6
checksums.
•
UDPChecksumOffloadIPv4 describes whether the device enabled or disabled the calculation of UDP
checksum over IPv4 packets.
•
UDPChecksumOffloadIPv6 describes whether the device enabled or disabled the calculation of UDP
checksum over IPv6 packets.
•
LSOV1IPv4 describes whether the device enabled or disabled the segmentation of large TCP packets
over IPv4 for large send offload version 1 (LSOv1).
•
LSOV2IPv4 describes whether the device enabled or disabled the segmentation of large TCP packets
over IPv4 for large send offload version 2 (LSOv2).
•
LSOV2IPv6 describes whether the device enabled or disabled the segmentation of large TCP packets
over IPv6 for large send offload version 2 (LSOv2).
•
FlowControl enables or disables the receipt or transmission of PAUSE frames. PAUSE frames enable the
adapter and the switch to control the transmit rate. The side that is receiving the PAUSE frame will
momentarily stop transmitting. The default setting Auto is recommended.